Certified protection
for work at height
for work at height
Systems tested by an independent laboratory and backed by the technical documentation you need to prove compliance on any project.
Lifeline manufacturer in Spain
We manufacture horizontal, vertical, permanent, and temporary lifelines.
Stainless steel
Cable
A·C·D
Class
We meet the standards
- UNE-EN 795
- UNE-EN 353
- Made in Spain
— Our models
Lifelines Manufactured and Tested in Our Own Workshop
We manufacture the complete range for work at height, with stainless steel cable, energy absorber, tensioner, end and intermediate anchors, and a system identification plate.
01 / ZOIS
Sheet-mounted lifeline
Lateral travel
- AISI 304 stainless steel
- Waterproofing with neoprene and rivets with gasket
- Type C certified, up to 4 users
02 / ZOIS
Standing seam roof lifeline
Protection without drilling
- Installation on standing seam sheet without drilling
- Pickled AISI 304 stainless steel
- Certified for 1, 2, or 4 users
03 / ZOIS
Tile-mounted lifeline
Invisible installation
- Anchor with minimal visual impact, at ridge level
- Designed for historic and unique buildings
- Compatible with types A and C
02 / ZOIS
Concrete lifeline
For a specific intervention
- Horizontal anchor on concrete columns or structures
- High-strength chemical or mechanical fastening
02 / ZOIS
Rail lifeline
Rail for low clearance height
- Rigid steel or aluminum rail
- Installed on a fixed structure
- Suitable for horizontal and vertical surfaces
— What does your project require?
Types of Lifelines by Project
Not all lifelines solve the same problem. Depending on the route, the access, or the structure, there are different solutions.
Horizontal Lifeline
The usual solution for metal sheet, sandwich panel, deck, or concrete roofs, with a continuous route and free passage through the intermediate anchors.
Vertical lifeline
For access by ladder, towers, silos, and structures where the climb is the critical point.
Permanent Lifeline
A fixed system, sized in the design phase and with scheduled periodic inspection.
Temporary lifeline
For construction phases or one-off maintenance jobs, without leaving a permanent installation.
Fall Arrest Net Manufacturer in Spain
Domestic manufacturer of safety nets. We design and manufacture to your needs.
All of our production takes place in Spain. This allows us to control quality, offer tight lead times, and customize any project without extra costs.
24h
Quote response
48/72h
Shipping after quote acceptance
— How we work
Lifeline Supply
We provide technical advice up front: if you send us the roof type, the sheet thickness, or the condition of the substrate, we will send back a feasible anchoring proposal.
01 / STOCK
Stock available
We keep a large stock so we can serve our customers as quickly as possible.
02 / PROJECT
Custom design
We prepare drawings, a technical data sheet, and a fixed-price quote. No hidden line items or surcharges for minor changes.
03 / FACTORY
Made in Spain
We produce custom configurations for each customer.
— How we work
Request Lifeline Pricing in 24 Hours
Tell us the square meters of roof, the surface type, and the location. We will send you a fixed-price, no-obligation quote in less than one business day.
- No obligation Fixed quote in writing
- Technical advice included in the offer
- Financing available for businesses
611 14 24 46
Mon–Fri · 7:00 AM to 3:00 PM · Direct technical support
Tell us about your project
We will reply within 24 business hours.
Learn About Lifelines
Anchors and Components for Your Lifeline
A good share of the inquiries we receive are not about complete systems, but about parts: companies looking for someone to sell them the right anchor for a specific surface. We manufacture and supply:
- Structural anchors for trapezoidal metal sheet, sandwich panel, deck roofs, concrete, and parapets.
- End, intermediate, and corner posts, with continuous passage of the shuttle.
- Energy absorbers, tensioners, stainless steel cable, and terminals.
- System signage and identification plates.
Each anchor is selected for the substrate, not the other way around. An oversized anchor on a fragile roof does not add safety: it adds a load transfer problem.
Independent Laboratory Testing and Technical Documentation
Our anchor systems are designed and tested in accordance with UNE-EN 795 (classes A, C, and D depending on type) and, in the case of guided type fall arresters on a rigid anchor line, in accordance with EN 353-1. For systems intended for several users at once, we also apply the criteria of technical specification CEN/TS 16415.
The tests are carried out by an independent laboratory. This is not a marketing nuance: it is what lets you prove the fall arrest system to an inspector, a tender, or the property owner, without relying on the manufacturer’s word. With each system we deliver a declaration of conformity, an installation and user manual, a technical data sheet, and a system logbook for subsequent inspections. You can find the details on our testing and certifications page.
The regulations do not eliminate the risk of working at height. They reduce it and make it demonstrable. That documentation is exactly what protects you when a project asks for paperwork.